Steel Pipe Tube Both Ends Hole Turning Machine Conveyor Roller Automatic Making Machine

Steel Pipe Tube Both Ends Hole Turning Machine Conveyor Roller Automatic Making Machine

Specification:

1. The machine tool is an automated special machine tool designed for processing the ends of the steel pipe of the belt conveyor roller. Our company designs this machine tool based on the principle of energy saving and high efficiency.

2. The tool has infinite speed regulation. The left and right feed cylinders use hydraulic synchronous circuits, which can feed and retract at the same time; the radial feed is manual and can be accurately adjusted according to the processing requirements; the hydraulic and PLC control systems that have been recognized for many years as the easiest to operate and have the lowest failure rate have been adopted, which greatly reduces the requirements for labor level and facilitates labor management and equipment maintenance.

3. Roller processing does not belong to strong cutting. According to the actual use of this process, this machine tool uses a 5.5Kw motor with low starting current, agility, high efficiency and low consumption, which reduces the cost of use.

4. It is equipped with a hydraulic automatic tool release mechanism. When the tool is fed to the predetermined position, it automatically releases the tool to avoid scratching the processed surface.

5. The clamping screw is set in the middle of the equipment based on long-term use experience; all double-car equipment with screws on the side is prone to twisting and jumping of the support plate after clamping when the equipment is slightly aged; the equipment with screws in the middle does not have this problem, and this equipment does not need to make a separate foundation, and the operation is stable.

Parameter: